INKBIRD Wi-Fi Smart Humidity Controller

This humidity controller can monitor or adjust the humidity on your phone through the app at any time anywhere. It supports both humidifying equipment and dehumidifying equipment. It supports humidity calibration and dehumidification control delay protection with 2 display screens.

• Remote control connect the IHC-200 wi-fi humidity controller to 2.4 GHz wi-fi, then you can monitor or adjust the humidity on your phone through the app at any time anywhere
• Dual relay output: support both humidifying equipment and dehumidifying equipment voltage: 100-Volt AC to 230-Volt AC 50 Hz/60 Hz, 10 Amp maximum power: 1200-Watt (120-Volt AC), 2200-Watt (220-Volt AC) humidity measurement range 10 99 % RH relative humidity accuracy plus minus 3% RH plus/minus 5% RH
• Plug-n-play: no complicated installation required display the set humidity value and the measured humidity value at the same time with 2 screens support humidity calibration and dehumidification control delay protection
• High/low humidity alarm: set a high/low humidity alarm, the controller will alarm to remind you if the humidity value exceeds the setting value and it also alarm when a probe error occurs press any button to turn off the alarm sound or you can turn it off on your phone